Posts

Scrap baling press & hydraulic baling machine for recycling

/in /by

Introduce

Hydraulic metal baler for steel mills, recycling processing industry and nonferrous metals, ferrous metal smelting industry, It bale a variety of metal scrap, steel shavings, scrap, scrap aluminum, scrap copper and other extrusion into a rectangular, cylindrical, octagonal and other shapes of qualified charge to reduce the cost of transportation and smelting.

Feature

1.Use hydraulic drive. Manual control and PLC auto control operation are available for selection

2.Installation without foot screws, in the absence of power can be equipped with diesel engine for power.

3. Type of baled block out can be chose side turn out, push forward out and front out way.

4. Pushing force with eight grades from 63 tons to 400 tons, the production Hficiency from 0.5 tons / hour to 20 tons / hour.

(5) Feeding box size and bale size can be customized according to the user’s raw material specifications.

Applications

Non Ferrous Metals

Coppers

Aluminum Cans

Aluminum Windows

Scrap Aluminums

Tin Cans

Steel Shavings

Scrap steel

Steel wire

Scrap casting steel

Stainless steel

Aluminum Chips

Aluminum Sheets

Aluminum and Copper Wires

Hydraulic metal scrap baling press safety rules

/in /by
  1. Before operating wear tight-fitting protective clothing, cuffs fastened jacket hem can not open, can not start the machine next to wear off clothes or cloth around in the body to prevent the machine twisting injury. Must wear a helmet, braids should be placed inside the cap, can not wear skirts, slippers;
  2. Metal scrap baling presse  idle run three minutes before work, and check oil tank is adequate, whether the normal sound of the pump, the hydraulic unit and pipes, fittings, piston if there is leakage phenomenon;
  3. After turning the package when the handle is pulled to cover the cylinder retracted position, then push the handle to turn the package. Turn around package board package once per turn should be cleared up, to prevent stuck;
  4. The operator must pay attention to the safety package, shop copper evenly spread copper in place, should cover the top of the door is closed, you can start packing;
  5. Hydraulic control lever when packaging should quickly pushed to the designated location to prevent the valve obstruction and hydraulic oil flow enough, resulting in motor overcurrent. Each action operations in place, need to be restored to the position the valve handle;
  6. Stop when the lid is closed the door, then stop the motor, turn off the power;
  7. After the completion of all hydraulic rod packing must retract the hydraulic cylinder, to prevent dust damage seals and oil spills;
  8. Regular maintenance work to do, find local pipeline oil spills immediately find machine repair process;
  9. If abnormal operation should be stopped immediately, remove the cause before proceeding;
  10. After the cover door open, non-pressure door operation, to prevent accidents;
  11. The oil tank must be rigorously filtered, and keep enough oil. Fuel tank should be cleaned every six months and replaced once the oil;
  12. Equipment lubrication should be required at least filling a lubricant class, class clean up the debris once the cavity capacity;
  13. As should be clear division of people simultaneously, to avoid the risk of misuse. Do not understand the main machine structure, performance and operating procedures are not allowed to start the machine;
  14. When the machine when severe leakage or anomalies occur in the work stop immediately. The eyes do not look toward the place of oil injection, can not directly hand to block, not be forced to work sick;
  15. When the machine during operation or packaging may not be repaired or touch moving parts, prohibited by hand or foot pressing material in the bin;
  16. Pump, valve, pressure gauge adjustment must be experienced technical personnel, if found faulty pressure gauge should immediately repair or replacement;

What is metal scrap baling press

/in /by

metal scrap baling press is used as the working medium by a special hydraulic oil through hydraulic pump as a power source, by force of pump hydraulic oil into the cylinder / piston via a hydraulic line, then the cylinder / piston there are several groups of co-ordinated seals, different positions are different, but they all play a role in sealing the hydraulic oil can not leak. : The hydraulic energy into mechanical energy is the use of a hydraulic transmission fluid pressure to transfer power and conduct a transmission mode control. Hydraulic device is an auxiliary component machine from the hydraulic pump, hydraulic cylinders, hydraulic control valves and hydraulic
Hydraulic baler belongs forging machinery in one, the main role is the metalworking industry.

YD-1350 hydraulic metal scrap baling press

YD-1350 hydraulic metal scarp baling press loading to the container

/in /by
YD-1350 hydraulic metal scrap baling press

YD-1350 hydraulic metal scrap baling press

YD-1350 hydraulic metal scarp baling press machine loading to the container